Display + Encoder is an auxiliary board for Main sub-family. This board is for control the system without a computer. With the rotary encoder with push button, it’s possible to navigate between configuration menus and change presets, modify delay, HPF and change the IP. The display shows all the info.
This board can be used with Main board sub Family. With Main Plate and Main board to extend the standalone capabilities. With this board it’s possible to control some parameters.
Only a 16 wire bus it’s needed for connect Main Plate and Display + Encoder boards. Its shown below. An example for an advanced multi-way DSP processed speaker rear panel. Very easy to integrate, and cost effective design process for customers.
*Highlighted in red the connection between Main Plate and Display + Encoder board.
For other kind of products that customers want two audio inputs, it’s necessary to use Main board. For this board it’s necessary to use external I/O boards for audio, display and network signals. Display + Encoder board is one of these three boards. For Main boards, connection bus between I/O boards it’s bigger because transports more signals. A 40 wire bus cable it’s needed for the connection.